IMPACT-HAMMER CRUSHER

This impact-hammer crusher can reduce the 600~1800mm feed material into size less than 25~20mm in one stage. It is used mainly for crushing brittle, medium hare and less moisture content materials (e.g. limestone) in various fields such as cement, building-material, mining, chemical industry etc. The compressive strength of the materials does not exceed 140Mpa.

The duality of the crusher is always the best among the same trade at home, with a large reduction ratio, low power requirement and small occupy area.

Fine Grained Hammer Crusher

This series of hammer crushers is suitable for crushing various britte materials such as coal salt, chalk, plaster stone alumstone, bricktile limestone and cement grog etc whose compressive resistance does not exceed 100 Mpa and the moisture content should not be greater than 15% and the size of discharge is < 5mm (amount to 80 per cent).

RING HAMMER CRUSHER SERIES WORKING PRINCIPLE

This series of machine is a punching rotor type crushing machine with ring-hammer on the rotor. First the material fed to the crushing space is crashed by punching force of the ring-hammer rotating at high speed. mean while the material crushed gets kinetic energy from the ring-hammer and is punched forward the crushing board, then it gets punched the second time and fall to the sieve plate. The material is cut, squeezed and crushed into pieces by the force of ring-hammer and their own rubbing and get out of the machine will be sent to the metal collector and get cleared off periodically.
APPLICATION
This series of ring-hammer crushers is suitable for crushing various materials of brittleness such as coal, gangue, coke, slay, shale and loose lime stone etc. Whose compressive resistance does not exceed 10Mpa and the surface moisture content should not be greater than 8%.