Henan Fangda Industry Co., Ltd. is a mining machinery manufacturing enterprise
  +86-15333827088    

Products >> Stone Crushing Machine >> Hammer Crusher

  • PFL Series Vertical Compound Impact Crusher
  • PFL Series Vertical Compound Impact Crusher
  • PFL Series Vertical Compound Impact Crusher
  • PFL Series Vertical Compound Impact Crusher
PFL Series Vertical Compound Impact Crusher PFL Series Vertical Compound Impact Crusher PFL Series Vertical Compound Impact Crusher PFL Series Vertical Compound Impact Crusher

PFL Series Vertical Compound Impact Crusher

Product Description

The vertical compound impact crusher is fine crushing equipment that crushes materials in middle hardness, such as rocks and mines with pressure strength less than 210MPa and humidity less than 5%. (E.g. limestone, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, burned magnesite, serpentine, calces, gypsum, lump coal, zeolite, sandstone and so on). It is widely used in the industry of mining, metallurgy, building materials, fireproof materials, cement, coal, glass, chemical industry, electricity power and so on.

Working Principle

The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of centrifugal force. Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.

Advantages

The machine has special structure in the part of throw-up disc, which can improve the usage of abrasive material and reduce the cost. The wearing parts are made of anti-abrasion material (metal alloy in high hardness and toughness), so it can endure for long time. It has the advantage of high crushing ratio, large output, high efficiency, and low consumption. It is of easy operation, good performance, low noise, little vibration and good airproofing, so it is a high efficient and high level fine crushing equipment.

 

 Technical Parameter

Model

Feeding Size
(mm)

Output
Size
(mm)

Capacity
(t/h)

Motor
Power
(kW)

Weight
(t)

Overall Dimension
(mm)

PFL-800

<50

<5,90%

5-15

22

2.1

2000×900×1650

PFL-1000

<80

<5,90%

10-25

45

3.2

2700×1150×1800

PFL-1250

<120

<5,90%

20-40

75

4.2

2900×1350×1850



Previous Product:PC Series Hammer Crusher

Contact Us

    Name: Sen Wang

    Tel: +86-15333827088

    Fax: 86037167811998

    Mobile: +86-15333827088

    E-mail: 19600012@qq.com

    E-mail: 15333827088@163.com

    QQ: 19600012

    WeChat: wangsen837420

    Whatsapp: 8615333827088

    Add: Room910, International Plaza, 198 Jianshe xi Road, Zhengzhou, Henan Province, China

    facebook: https://www.facebook.com/wangsen0371 facebook: https://twitter.com/FangdaHenan facebook: https://www.youtube.com/channel/UC_sgo4c0-sWOEzt83xUXRug QQ: 19600012 19600012@qq.com 15333827088@163.com
WechatClose
Wechat